2000 Dodge Intrepid "hood latch cable handle broke" Questions

hood from the front and release the latch that way . either way is going to be tough to get to. If cable still attached to broken handle, and you can see cable, use sor something and give it a pull if

...is broken how do I get my hood open IF HOOD LATCH RELEASE CABLE BROKE AT RELEASE HANDLE YOU CAN TAKE A PAIR NEEDLE NOSE PLIERS PULL THE CABLE ENOUGH TO OPEN HOOD SO YOU CAN REPLACE RELEASE

...hood latch. When I pull on the inside latch, nothing happens. How can I open my hood, and fix this problem for the future ? can you grab a piece of the cable from under dash?if so pull it and see if ...

latch which is located in the front center of the hood and using a screw driver or something similar push the lever to release the latch. look under the drivers side ...if the cable is broken there ..

...hood and grab it there. if it broke off at the hood latch itself, then you will need to get/ make a hook or pushing rod to engage the mechanism directly to release the latch and then replace the ...

...hood latch safety tab that you lift or move to the side to open the hood after cable release you must disconnect the lock latch or the hood striker that it locks onto and raise the hood this can be ...

...my hood release cable is broke how do i open the hood i assume it broke at the latch? if you lay on the ground you might be able to get at the latch. if it broke at the handle grab the wire with ...

...it broke off at the hood latch itself, then you will need to get/ make a hook or pushing rod to engage the mechanism directly to release the latch and then replace the cable the latch looks like

latch broke off when I tried to release hood in 15 degree weather. The cables should be fine (replaced last year and basically new), just the plastic piece broke off in cold. Any way to open hood? Can

...at handle at dash use pliers and find any exposed cable use pliers if it broke under hood then i reccomend taking it to a shop if you can get latch throught the grill try to pry cable loose ans pull ...