2000 Dodge Intrepid "2003 saturn vue cylinder 1" Questions

Question about Dodge Intrepid

2003 SATURN VUE SERIVE ENGINE SOON LIGHT IS

2003 SATURN VUE SERIVE ENGINE SOON LIGHT IS BLINKING ON AND OFF RAN THE OBDII READER AND CODE P0304 CYLINDER MISFIRE CAME UP I CHANGE SPARK PLUGS AND BOOTS BUT CAR STILL DRIVES ROUGH SHAKES AND WHEN ...

Question about Dodge Intrepid

1 Answer

My service Light comes on and stay on after the

...Saturn VUE, 2003, 4 cylinders. What else can I do? Can I reset the service engine lght? If the light comes on then there is a code. the shop you went to may not have the updated software. try another ...

Question about Saturn Cars & Trucks

2 Answers

2003 Saturn Vue 2.2 liter. Why is it stalling and the codes are P0340 and P1599. The car doesn't have a camshaft position sensor?

2003 Saturn Vue 2.2 liter. Why is it stalling and the codes are P0340 and P1599. The car doesn't have a camshaft position sensor? Repairs made, checked or parts replaced: Crankshaft position ...

Question about Dodge Intrepid

1 Answer

Having transmission problems and also misfiring in more than one cylinder? First problem is with transmission, it starts out revving high and dosen't come out of low gear until I get over 3000rpms, is

...Saturn Vue? I assume you are taking about an automatic transmission. There are 2 main reasons why this is not working. 1 The transmission oil is overdue to be charged. 2 There is a leak on one of the ...

Question about Dodge Intrepid

1 Answer

Oil in coolant system and all over under carriage and engine.

...1/2 ounce of oil to the sparkplug hole before testing each cylinder. if theres alot of increase in compression, your rings are geting bad. if theres little or no change, its likely valve seals. if ...

Question about Dodge Intrepid

1 Answer

Piston hitting valve

...1 cylinder? Something is terribly wrong, congratulations on testing the configuration by hand. I've seen what damage has been done by people that just hooked up the battery and wind it over. They had ...

Question about Dodge Intrepid

2 Answers

Where can I find the hydrolic clucth resivoir and

cylinder (1) to the transaxle. Install the clutch actuator cylinder bolts. Tighten the bolts to 89 inch lbs. (10 Nm). Install the transaxle. Connect the clutch master cylinder line to the transaxle by

Question about Dodge Intrepid

1 Answer

I have a 2003 saturn Vue AWD V6 i'm getting error codes

...2003 saturn Vue AWD V6 i'm getting error codes PO700,PO335,PO421,P2119,PO102,PO37,PO57,PO44,PO431 when it gets to operating temps it will shut off if left to sit for 30-40 mins it will start again. ...

Question about Dodge Intrepid

3 Answers

I have an 2003 saturn Vue V6 Cylinder 3.0L. My problem is leaking oil from oil filter cap. I have taken oil filter cap off, cleaned around housing and replaced filter and O-ring. Put cap on and tighte

...2003 saturn Vue V6 Cylinder 3.0L. My problem is leaking oil from oil filter cap. I have taken oil filter cap off, cleaned around housing and replaced filter and O-ring. Put cap on and tightened. One ...

Question about Saturn Cars & Trucks

2 Answers

Engine Misfire

...2003 Saturn Vue 3.0 6cyl. Cylinder 1 & 3 misfire. Just had new plugs installed 1500 miles. Here's a link to your code problem,P0300 is their's a misfire and every number after 300,like 301 means ...