ball joint in lower control arm, position the ball joint in control arm so notch in ball joint stud is in the direction shown. This will ease assembly of the ball joint to the steering when installing
...lower ball joint is pressed into the lower control arm. You will need a ball joint press to remove and install the ball joint. The other option is to replace the lower control arm. Some parts store ...
...lower ball joint on 1993 caravan. Is the original ball joint ( lower ) pressed in or welded? how do you change this? Very simple...I don't have my Chilton's in front of me but I can tell you the ...
How do i rplace a lower ball joint on a 2006 caravan they are pressed out and as well when installing. you need a ball joint press
lower tie rod ends and ball joints? you have to have a press for the ball joints the tie rods just unscrew once you loosen the adjusting sleeve there are speeded videos on youtube that show everything
...lower ball joints need replaced mine came with no grease zerks - installed after ball joints replaced. had clunking sound also - went away after new replacements. The "swar arm" you just replaced is ...
how to remove lower control arm on a 02 dodge caravan? Remove the lower ball joint and the 2 bolts that attach the control arm to the frame.
...lower ball joint,new tires, wheel alignment, tire balance......... still vibrates at high speed.........2000 grand caravan 3.0 ..... what could be my problem? outer tie rod ends seems to be the only ...
...already replaced front strut assemblys&sway bar links.upper strut mounts look ok.seems to be close to rack&pinion,left lower side where sound comes from? Have you have the ball-joints
...lower ball joint. when the ball joint is seperated, you can swing the whole steering assembly to the side. tap on the end of the axle, being careful not to damage the threads, and pull out of the ...
382 questions posted
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions