1999 Chevrolet Lumina "relay switch" Questions

switch the ignition. If the fuel-pump relay is not working, you can "jump" the unit with a small lead jumper cable. You will need to access the fuse panel and insert the cable into the relay unit; the

on the right one is not . Next time the right one is on and the left one is not. Both new bulbs the relays are new and there is power to both headlights but not at the same time. This just started. No

ac on max fan switch on high and neither coolant fans come on all fuses and relays changed Check relays (usually un.derhood) first See owner manual for location. Then check engine coolant temperature ...

Where is the starter relay (or ignition relay switch) located at in a 1996 chevy lumina? IN ONE OF THE FUSE PANELS.

switch to on and a short jog of the engine. Were not sure the pump is bad. did however get 12volts at the relay and chked crank sensor no mechanical damage noted pretty sure this is a non issue. Check

wondering where the fuel pump relay switch is on the 1990 chevy Lumina If it is the same as my 1991 lumina it will be mounted to the left strut tower under the hood. There should be a fuse and a relay

...relay Let me give you a simple fix The biggest cause of fan burn out is voltage drop. On 80% of Chevy cars Lumina and the Malabu and even the Caramo I have had over 300 to come through here and this ...

...are inoperative. I have done the following: 1. Checked the horn fuse. 2. Checked that the horn relay "clicks" with a 9-volt battery across the coil terminals. Also checked continuity across the ...

...relay? THE LOW PRESSURE SWITCH SYSTEM IS PROBABLY LOW IN FREON TO CONFIRM LOCATE LOW PRESSURE SWITCH AND JUMP THE TWO PINS IF COMMPRESOR ENGAGES THR SYSTEM IS LOW DONT LEAVE IT JUMP YOU WILL BLOW UP ...

...switch the dash lights dont illuminate and the exterior lights dont either. fuse is good since the horn works. Blinkers work so its not the flasher relay. Any ideas? I would go to Autozone and get a ...