1988 Chevrolet S-10 "knock sensor" Questions

...knock sensor had the same problem.. check the wiring to the knock sensors and the knock sensors its self. i had a wire that didnt clip on well to the knock sensor by the firewall, so it gave me that ...

...THE KNOCK SENSOR MODULE SEND 8 TO 10 VOLTS TO THE ECM INDICATING THERE IS NO DETONATION.KNOCK SENSOR MODULE LOCATED ON THE LOW SIDE OF THE ENGINE BLOCK.ESC MODULE ANOTHER NAME FOR KNOCK

...knock sensor on 1996 2.2L chevy s-10 Not sure where to even start, basicly where is it at(is there multiple sensors?) and how to get to it to replace it? knock sensor is off the intake on firewall ...

...knock sensor Chevy S10 truck I just got my truck back from being fixed and now the engine light is on. They said now its the Knock sensor. I just had 2 injectors plugs and wires and ems brain put on. ...

...& or the Blue wire going to it if it is Grounded , the timing will not Advance, Knox sensor is there to detect knock then it grounds if it catches a Knock to Prevent Pre Ignition Ping-SPARK

...down the road and it almost seems intermittent. I can hear it in gear or out or with the clutch depressed. Any ideas/known issues with these engines? check out your knock sensor , just a

The book i bought ( a haynes repair manual) does not have a sensor even located there. I need to know if it is a knock sensor for my esc system or something else. tempature sensor temperature sensor..

...there is the crank sensor right next to the knock sensor towards the bottom. now the rest is easy. remove & replace. 4.3L engine it would have been by the harmonic balancer in the timing

...mis firing changed knock sensor plugs plug wires ignition module coil still misfiring any suggestions on fixing it Check the TP sensor its common for it to be out range and will give you a

...couple thousand miles ago, but ping is back. Do I need to buy higher octane gas? A bad EGR can make it ping..Also a low Barometer sensor can also make it ping...But first i would check the knock ...