1988 Chevrolet S-10 "ignition actuator rod" Questions

...actuator rod or just replace ignition switch? releasing key still powers radio,etc. I think that you need to investigate what is making the resistance. I would remove the ignition switch, give some ...

rod into the ignition switch and assemble the switch onto the steering column. Once the switch is properly positioned, tighten the ignition switch-to-steering column retainers to 35 inch lbs. (4.0 Nm)

...the upper actuator rod, the pin that connects it to the lower actuator broke off. Never had any ignition problems, one day it just won't turn off due to broken actuator rod. Hope this helps

...ignition actuator rod pushes on can be adjusted upward. Make sure the steering column itself isn't damaged though you can damage the switch if the column is worn out and you adjust it upward Sounds ...

ignition actuator I am having issues with my ignition actuator rod. I can turn the key to the starting position but the truck doesn't start. Is there a way to bypass the actuator and just put in a ...

...ignition actuator rack kit. (I asked for an activator rod, according to the repair manual. but the parts house didn't show activator rod in their data, so they sold me the actuator rack kit instead. ...

ignition key What axactly is an Actuator Pin? Is it the thin (metal/plastic) rod that connect key to ignition switch...can someone confirm.... Yes, the rod is the actuator.

ignition actuator rack broke from acuator rod after an attempted car theft my steering wheel neck pannel is broken and the actuator rack and rod is exposed. can i reconnect the actuator rack switch ...

so you should be able to remove the shroud and manually manipulate the ignition switch since the actuator rod isn't connected to it anymore. That way you can hopefully start it as well as turn it off

...remaining bolts.with key in lock position remove switch from rod this actuator rod is for ignition switch. to install the new ignition switch work from 6 back to 1. Joe Thanks for choosing