1988 Chevrolet S-10 "distributor cap number 1 chevy" Questions

Ad

...distributor cap removed rotor will point to number 1 cylinder in cap. Also number 1 cylinder is on drivers side all the way to the front the next cylinder behind that is number 3 and then 5. So ...

Ad

Question about Chevrolet S 10

3 Answers

...distributor cap? GET A PIECE PAPER DRAW A LARGE CIRCLE TOP UPPER HALF CIRCLE LEFT TO RIGHT WRITE NUMBERS 1 AND 3 BOTTOM HALF CIRCLE LEFT TO RIGHT RIGHT NUMBERS 2 AND 4 THAT YOUR DISTRIBUTOR SPARK ...

Ad

...distributor cap number one is at 5 o'clock. if you have the flat (edi) distributor the firing order is the same but number one is in the middle of the driver side. The pistons are numbered, #1 front ...

...distributor cap and spark plug wires? firing order 1342, distributor, clockwise rotation. i do not but you can get a print out of the firing order from autozone or advance auto parts Here is how you ...

distributor cap.Bring the engine to top dead center on the number 1 compression stroke. Align timing mark to 0. put a scribe mark  on the distributor housing in line with the rotor.Scribe another

...distributor where the rotor is pointing at number one one the distrubtor cap ,when cap is on the rotor is at number 1 on cap ,should crake there ,time with timing light then ,hope this helps you, ...

...cap upon instyallation. You may have to try and align this many times till you get it right. be patient doing it for it may take awhile. hald the rotor and watch were you star and see were it aligns ...

...distributor cap. Number 1 is on the right side, closest to the front of the engine. Best of luck! Is this a V6 or a V8? Some Chevy Distributor Caps are actually marked with the cylinder numbers. Have ...

Question about Cars & Trucks

1 Answer

...cap. it is a hei super coil distributor so if i have engine at tdc. i dont know if i am out of time cause befor i used this distributor i was at tdc on piston one but distributor was facing number 8 ...

Question about Cars & Trucks

1 Answer

distributor cap an rotor keep it from starting, put number 1 cylinder on the top compression stroke an the distributor button on the 6 position an it still will not start what am I doing wrong Setting

Not finding what you are looking for?
Cars & Trucks Logo

606 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...