1988 Chevrolet Corvette "head" Questions

I would like to know the torque settings for head bolts on a 454 big block? Aluminum heads-- Short bolts-65 ft.lbs. Long Bolts-75 ft.lbs. If no aluminum heads.....80 ft. lbs. YOUR TORQUE SETTING IS 80

Will Lt1 or Ls1 heads fit a 1979 or 1987 or 1990 350 yes but you will need to get a intake manifold to match the heads The gen II LT1 has reverse flow heads, so without some major modifications, it ...

Head lights want go up or down have you checked for a feed to teh motors inside the headlights i think head light go up and down due to this: by using the light switch on the steering column.

head lights in my corvette do not close CHECK HEAD LIGHT FUSE. check connection--see if motor runs when you switch off. If motor runs to open they should close.

what is the average repair time for a head gasket on a 1984 corvette both heads about 6 hours

repair head light can seal and retaining ring left head light vacuum canstur seal blown out of vacuum can try here:http://www.docrebuild.com/

raising and lowering the head lights for 89 raising and lowering the head light on the right front side for 89 corvette check power to assembly- see if motor runs--if it does, gear must be rebuilt. ...

I WANT TO REMOVE THE ENTIRE - POP UP HEAD LIGHT FROM "98 CORVETTE I WANT TO REMOVE THE ENTIRE - POP UP HEAD LIGHT ASSMBLY FROM MY 1998 CORVETTE. NOT REPLACE A BULB BUT THE ENTIRE ASSEMBLY, SO I CAN ...

removing the whole pop head lights assembly from my 1997 corvette I have the same problem. I am not interested in repairing, or re-installing a new pop up head light system to my vette. I just want ...

how to replace the head switch in a 1987 corvette someone stated that this (head light switch) might be the reason my dash will not light up Car LED/HID Light