1987 Chevrolet S-10 Pickup "fuel hose replace steel line" Questions

...fuel hose that goes along the floor of the vehicle hopefully there is a place to unscrew stock unoin and replace the line or remove to repaire with said flaring tool and coupler. PS follow the ...

...fuel line but it can all be replaced with 5/16 rubber line and hose clamps,the quick connect fittings can also be purchased at a parts store and they have barbs on them so that you can attach the ...

...fuel return, and vaccume/vent. chances are being a 94 they are rusted, or have rubbed together enough to wear a hole, and it usually happens to the pressure line, the lines are usually steel, and the ...

fuel line hose to replace entire line... NOT necessary..old school repair if fine replace line is $$$ and not neccessary very little pressure in fuel line mostly gravity flow you may even say its more

...fuel line is a short rubber hose, or a steel line all the way from the fuel tank. Most dealers charge form $80 to $100 per hour, plus the fuel line and other parts costs. A short rubber hose cost ...

...fuel pressure blowing hoses off connections if you cut steel lines to fit rubber hoses . the hose has to have a pressure rating of 150 + psi , the steel lines ends will have to be flared so that the ...

...fuel lines? The hose goes between the frame and body of the car I can not pull or push them out, so how are you suppost to do it? Step 1-Determine type of fuel line to be replaced. Rubber hoses will ...

...Plymouth Acclaim On a 1993 Plymouth Acclaim, I already replace the rubber hose from the fuel filter to the steel fuel line and it is still leaking? check to make sure hose clamps are tightened ...

...fuel line. thinkin about cutting off a 4-6 inch section and replace with rubber hose and locks. WHAT TYPE OF LINE STEEL OR PLASTIC, IF PLASTIC IT WILL REQUIRE A SPECIAL REPAIR KIT YOU GET FROM PARTS ...

...fuel hose secured with hose clips were being replaced by push on/quick release connectors sealing with an internal O ring. If the fuel lines are steel there will still be short lengths of hose used ...