1987 Chevrolet Suburban "truck dies put gear chevy" Questions

94 chevy suburban revs up and down, then dies my 94 chevy suburban suddenly died then started but rev up and down then died when put in gear timing chain

...dies. HELP!!! it sounds like the motor's tick over is far to slow when the car is put in gear if the tick over is say 750 rpm out of gear then it stalls when you put it in gear lift the tick over up ...

truck died on me for the first time ever. When I started it, it idled terrible, it would rev up and then down and almost die. Put it in gear and it would die. Replaced plugs, wires, pcv, dist cap &

...truck died, re Timing Chain replaced, Spark Plugs and Wire replaced, Fuel Filter replaced, no strong gas smell from throttle body after pumping gas dozen times.. strong in trying to turn over but ...

...put it in gear and step on the gas it dies and it will Idle up the road find but don't push on the gas it dies I have a 1999 Chevy astro van 4.3 it start but when you put it in gear and step on ...

...dies when you put in gear have to give it gas as you shift in to gear and it might not die has did this for along time does it more when motor is warmer than when first started check basics first - ...

...dies when put in gear or stopping i have a 1993 chevy lumina sedan. 19 yrs old, engine has had alot replaced on it. mileage is 116000. it dies when i come to a stop or put it in gear and let off the ...

dies when put in gear.cranks up an runs fine but dies when you put it in gear get your fuel filters and cataltic converter checked No one has mentioned the torque converter could be in locked position

...dies when put in gear. Sounds like it could be a mis-fire. At an idle, remove a plug wire to see if it stalls. If it does, re-install it and go to the next one. If you remove one and get no change, ...

...put it in drive and start going it will shift into 3rd gear but it won't continue to accelerate. It just gets really loud and the rpm's go way up then eventually it just stops but doesn't die. check ...