...ignition module inside of the distributor. You can remove your ignition module from the distributor and have it tested for free at most auto parts stores. If you install the ignition module (either a ...
...ignition control module located? Have power to everything, starter has tested ok, solenoid is good. Will not start. all wires have have tested good. was told to check ignition control module, but am ...
Control Module - Ignition will the Control Module - Ignition stop my injectors from opening up YES.
...ignition module loses input signal from the distributor itself, 2wire connector hardwired out of top of distributor itself plugs into ignition modle, have to remove distributor cap to see it. Replace ...
Question about Chevrolet Caprice
...module that is inline from the ignition to the starter. Additional symptom was that the engine would barely run- I'll need to troubleshoot further, I'm not sure if the computer could be to blame. Any ...
...time, it is good, i just need some help, i also put new ignition coil and ignition module in, the compression is good also converter sounds clogged tap it with a hammer a couple times then try to ...
...in my 1980 chevy caprice while driving, i changed spark plugs, distributer cap, rotor button, and ignition module, what could possibly be wrong now? Have you check your heater core it might be ...
...ignition control module sounds easy to change but I dont know where its located it is in the distributor it has multiple wires going to it you must first remove the dis. cap then the dis. rotor then ...
...ignition module tool" you will see the two most common ones. The one that has the two different tools offset is my personal favorite. Either one will work and either will likely be available at any ...
116 questions posted
Usually answered in minutes!
227 Questions
150 Questions
137 Questions
41 Questions
1 Questions
