1987 Chevrolet Camaro "throttle" Questions

...but not sure Hi 1) If the gas pedal is hard to compress you could have a broken spring inside the throttle housing. The throttle housing is located in the sealed compartment of the cruise control ...

Is there any way to get around changing the whole throttle body to replace the tps the Throttle position switch,is a little black switch "mounted on the drivers side of the throttle body",There would ...

1986 camaro z28 throttle does not work car is hard starting, fuel pressure bleads off quickly with maf unplugged you can use throttle, if you play for awhile holding throttle about half car will start

...except while on the scanner you can clear the code and the car runs fine. We installed a used 50.00 throttle body no good. We are now trying to go through the flow charts on alldata----have any other ...

my car wont stay running with out me pushing the gas i cleaned the throttle body out and new plugs and wirers and cap roter but it wont stay running inless i have my foot on the gas and if i put in ...

1989 Chevy Camaro RS 2.8 throttle problem. I can't figure out what's going on with my Camaro. I try and give it throttle and it's got no response it just wants to die. Can somebody help? Question ...

...go with the picture. The arrow points to the front of the truck. (1) Fuel Injector 2 Connector (2) Throttle Actuator Control (TAC) Motor Connector (3) Throttle Actuator Control (TAC) Motor (4) ...

...is off and my rpm is very high can u tell me why What engine and fuel system? take a look at the throttle to make sure that the butterflies are fully closing. push it back and if it drops the rpm, ...

...only shift at high rpms? 1983 Z28 with crossfire injection Check the TVI cable that houses the throttle cable. Underneath is a push-button that releases the cable HOUSING and allows you to move ...

I have a 1991 Chevrolet Camaro with a TPMS Throttle sensor out I had it diagnostic at AUTO ZONE and this young kid did not know where it was located. Could you tell me where it is to see if I can fix ...