...open, neither will the door, and the only access is through the rear door cover plate (AFTER you climb in the back!). Not sure where to go with this..... Sounds like you have a wiring issue going on ...
Question about Chevrolet Blazer
door being open and closed all the time(nothings perfectly designed). 2.) Check the relays in the fuse box, I can't remember if on this model vehicle if they used separate relays for each door or just
Open car door with energizer 9 volt battery you forgot the words HOW TO? or CAN this work, or ??? try a real question please and do post symptoms. someone told you the door locks might open with 9v ...
...car. DO NOT ATTEMPT TO DO ANYTHING ELSE EXCEPT OPEN HOOD, DO NOT TURN KEY TO RUN OR ATTEMPT TO START. ANYTHING COULD RESULT. MINOR OR MAJOR. THERE IS A COMPUTER MEMORY SAVER THAT MATES A 9 VOLT TO A ...
cigarette lighter and have a 9 volt battery which should be enough to power the trunk release. Both front doors can be opened with a key. Once inside, you can pop the hood and work on the dead battery
car or a replacement key fob without the electronic guts? 3. Does key open the door? If so, put in ignition, turn to ON (if you can) and press Open Door button on key. Try even in Off position if not.
...open the doors my emergency lights/dashboard backlight/stereo backlight all start flashing and do so until 10 seconds after I close the doors. I still have power to the radio and headlight, the van ...
Question about Cars & Trucks
...open the doors the horn will blast intermittingly. Number 1 tip when changing batteries. Maintain power to the system using wires, jump leads, a battery charger or even a MN1500 - 9 volt battery. You ...
Question about Chevrolet Blazer
...car icon, and the door lights. The high-voltage battery voltage measures 223 v. The 12-volt battery open circuit voltage measures 13.05 v. I seem to recall that the high voltage battery has a module ...
...9 volts. i opened the mechanism and put it to the wire and pressed the keyfob tho motor moves a little bit..i think it was on the supply voltage.. the motor cannot push the lock/unlock button because ...
210 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions