1986 Chevrolet Chevy "wiring 350 engine test" Questions

350 Vortec. I have replaced the distributer, cap, rotor, plugs, plug wires and ingnition coil. It still has a slight hesitation at start up and seems to worsen as the engine warms up. I have performed

...350 is the coil bad or something else to test whats wrong you need a test light 12 volt. It's an ice pick like tool with a clear handle and a ware with an alligater clip. hook the clip to ground near ...

350, w/double barrol carb. ive replaced the starter, ign. switch, and when i go to start it, i get nothing. it wont even turn over, but i do get power to the cab(my radio , and headlights). what could

...350 4WD Auto Ok i go out to start the truck and it starts right up. Leave it running or drive some where and then turn it off and it wont start. The engine is turning over but it just wont start. I ...

...350 motor, the exhaust manifold has had a small crack for years but when it warms up the noise is not that bad several months ago it started not idleing right and cut out when giving it a little gas ...

...350 engine backfires and bucks and jerks when giving it alot of throtle when driving it in any gear Without actually seeing it, I can';t give you a definite cause for your problem. I can give you ...

...350 engine. It idles great, it accelerates great, but feels like it has the "hiccups" at a steady speed. The distributor and plugs and wires are relatively new. The engine runs very smoothly at idle, ...

...350,V10 ....when the truck does not start, I have no fuel pressure in the fuel rail, also the fuel pump will not pump or make any noise. I can go back out to start the truck a day later and it will ...

350(7.3 diesel), I have smoke coming from the 'glow-plug' relay(where the ground strap attaches from relay) when first turned on and while cranking engine.The wires do get hot and the insulation burns

...350: I have 2008 F250 I unpluged some wires while engin... I have 2008 F250 I unpluged some wires while engine running Now it will not start If you unplugged wires while the engine was running or ...