Question about Chevrolet Chevy
...back fire and when I idle will back fire and not want to go 1994 4.3 vortec 6 cyl i think the ignition control modular is bad? hi, backfire means the ignition settings are wrong,which type of repair ...
Question about Chevrolet Chevy
... IF THE PISTON IS FULLY EXTENDED AND YOU HEARD A AIR SOUND THEN YOU ARE RIGHT, PLACE THE DIST BACK IN TURN THE ROTOR 1 TO 2 NOTCHES BACK TO THE RIGHT AND HAVE SOME ONE CRANK THE ENGINE IN ...
...rotor cap to tight? tried to tune up and now it will not stay running with out foot on gas, it back fires and it ran fine before i tuned it, please help friend if it backfire then you must check ...
...fire. I just rebuilt a '78 350. I've got compression, spark, fuel & the timing is set. When I hit the ignition it will turn over nicely, & it will "cough" every now & then, but it just ...
...fire from plug wires, changed rotory cap,ignition module,distributorcap. I have no power from to the cap but still no spark. Did you grease the back of the ignition module? if not do so. Ok... try ...
...fire wall down on to the block. Just some of the many places coolant could come from on the back side of a engine. All I can help you with is the Info you have gave us. If you can get us a year make, ...
...The cylinders are numbered 1-3-5-7 on the driver's side of the engine counting front to back. Passenger side is 2-4-6-8, front to back. You will need to get #1 cylinder at top dead center ...
WHEN I TURN THE ENGINE OFF AFTER I HAVE RAN THE TRUCK IT BACK FIRES THIS IS A1985 CHEVROLET PICKUP 3\4 TON SCOOTSDALE WITH A 350 Check idle speed and mixture at idle. Often with too fast idle speed, ...
...to fix the carbarator problem i have put a new carbartor in it and new spark plugs but it still back fires and runs really rought Check the timming.And make sure the HT leads ar fitted
291 questions posted
Usually answered in minutes!
363 Questions
125 Questions
128 Questions
