1986 Chevrolet Camaro "release electric park brake case" Questions

...release cable. Remove both dash side panels. Remove left and right lower dash trim panels. Remove glove box. Remove 7 screws securing center accessory console. Disconnect wires on accessory console, ...

...release switch and communication enable. The electric parking brake module receives wheel speed sensor signals, engine torque, gear information, brake pedal signal, and etc. through GM-LAN. AND MORE, ...

...release linked to stop light switch,manual or electric,? once released from park everything works fine untill put back in park position again. The release for the shifter is tied to the brake lites, ...

...park, such as might happen if children are playing in the front seat. This solenoid can malfunction. Most cars have a manual release near the shifter (check the owners manual) to release the shifter ...

brake to release? have checked fuse, relays and connections You have no vehicle shown here When you refer to fuses & relays-- I would assume --you already know you have an electronic parking brake

...park. Check your owners manual to find the emergency release button. Then check to see if it will start in N. You could have a shifter cable problem. In that case disconnect the linkage from the ...

...electric contacts which come into play when the brake pedal is pressed. Normally its just two terminals which come into contact when the brake pedal is pressed and a spring is meant to seperate the ...

...park is easy disconnect the linkage at the transmission and move the selector red by two notches (by hand) this will place the transmission in neutral if there is resistance chock the wheels release ...

...release the compartment. Remove the two IP attaching bolts through the storage compartment door Remove the center support screw. Remove the three IP upper support screws. Remove the IP from the front ...

brake release cable from the parking brake lever. Unfasten the screws that retain the DLC instrument panel left side sound insulator. Feed the DLC through the hole in the sound insulator. Unfasten the