1985 Chevrolet Sportvan G10 "chevy van" Questions

...chevy van with 3o5 i have a 89 chevy van with 305. the egr is not working properly. the vacuum out of the throttle body is good but there seem to be no vacuum coming out of the egr valve. is this ...

...chevy g10 sport van is it inside the gas tank or under the van i am looking for a diagram of the engine v-8 5.0 please help Fuel injected vehicles in the tank regular carburated on the right front ...

...chevy van. It is a V6 engine and does have AC Under the passenger side dash is a plastic cover remove philip screws removethere are thre bolts holding the core to the van unbolt remove the two hose ...

...chevy g10 van - window seals are old and window seals are old and cracked. Do i need to remove all of the trim pieces to install new seals? Are new seals soft so they will just press into place? yes ...

...chevy g10 conversion van? It is located on top of the heater box in the passenger side remove the glove box to gain access there are two 7mm screws and a relay bracket holding it in place it is a ...

Chevy Conversion Van, 1500 I think, won't even give me the faintest idea that it is trying to turn over. Just a click when I turn the key to crank.... battery is charged..... starter isn't busted.....

...chevy express conversion van 5.7 liter I have misfire in all cylinder after the truck is warmed up I have new plugs cap rotor wires new o2 sensor. o2 sensor has been changed 3 times in 3 months I was ...

...chevy g10 van The fender is spot welded on.You will have to use a special spotweld drill bit that cuts around the outside of the spotweld. you drill through 1 layer only and use a screwdriver to ...

...chevy 10 van. Changed the filter and fluid but that didnt work. Forward gears work well but does nothing when shifting into reverse. 2 of the vavles are recessed on the valve body but 1 is sticking ...

adjusting the idel for a 1985 chevy van 308 engine with 4bbl carb There should be a base idle screw and the idle speed control motor.There is also a fast idle screw on the opposite side for the choke.