I have a 97 chevy suburban 5.7 liters, I have to try to crank it 3 or 4 times before it will crank it acts as if no fuel is getting to it but after that it will crank up so i changed the fuel pressure
...the distributor wiring position for 75 Chevy 350 HEI Order is 18436572. Put the timing mark on the crank at 0 and the rotor should be pointing either to the firewall or the front of the engine. If
Choke Light rough idle On a '85 chevy 350 in a k-10. truck will crank and sputter. exhuast smells like gas. then it will sputter out. the choke light will come on and then it will not crank again. or ...
Cam Crankshaft timing Would anyone know what the timing to the cam to the crankshaft is on a 1983 454 Chevy engine. 8 degrees before tdc crank timing mark at top center, cam mark top center will be ...
...will be hot the other cold. the one thats cold connect the test light and reconnect to the coil. crank the engine before cranking with the key on it should be lit cranking it should flash off and ...
...quit running on me and i changed ignition module iac valve and coolant temp sensor. still wouldnt crank so i changed fuel pump and she cranked right up awsome great... well little did i know in my ...
...out the old timing gear for a new one. How do I set the timing gear? have the cam gear and the crank gear dimples facing one another. The crank gear has the dimple facing straight up and the cam ...
Question about Chevrolet Chevy
2000 Cavalier Z24 2.4 cranks but won't start. If i spray carb cleaner in the intake it starts but won't stay started. I have replaced the fuel pump,fuel filter. cam sensor &crank sensor. What else
Question about Chevrolet Chevy
my 2005 chevrolet truck cranks but will not start occassionally i have replaced crank sensor with no luck coils are not firing during no start peroid scanner code is U1026 Here are some of the ...
497 questions posted
Usually answered in minutes!
210 Questions
125 Questions
128 Questions