1984 Chevrolet S-10 "put chevy 350 carb truck" Questions

...350 tbi! I am putting a carb. 355 chevy in the blazer and it use to have a 350 tbi in it! The motor was from a 1990 silverarode truck! most of the time all big hole wires go to the big post whitch ...

chevy 4x4 i put a new 350 in it from jegs with a new carb. the truck runs good when it warm but when its cold it is bad. it takes it atleast 30mins before it starts running good what can i do for this

...chevy engine misfiring it idles very rough, almost like a dead miss.... everyone is telling me different things... when the engine is cold it run ok, but as it get up to running temp. it dont don`t ...

...the line main fuel line with vac, put gas in carb it will run for around ten minutes then stop 1977 chevy 350 truck try running the vehicle without the feul cap and see if it quites or keeps

chevy step van 350 new fuel pump, rebuilt carburetor, truck wont start seems like it is not getting gas to carburtor pls help remove the fuel line from the carb, put it into a bottle, crank the engine

...put them in a 350 chevy block and make more horse power.will it work in my boat? i have a 2 berrel carb not injectors... Be better off with 327 heads and 2 carb manifold, but I think 305 heads will ...

chevy 350 that is backfiring through carbourator. Tried everything, three different mechs cannot solve. Please help, Regards, Andre I have the MSD distributor, coil and wires. Edlbroc carb. I have two

...put in a Chevy 350 4-bolt main crate engine, Edelbrock intake and carb, and Hedmann headers (it ran like a scalded dog LOL). My advice is to look for a Haynes manual covering the '71 model year. They ...

...Chevy 350 and I can't figure out why cause my timing is dead on and I also put a different carb on and does the same on v8 engine , back firing is contributed to 2 plug wires crossed check the firing ...

...chevy truck with a 350 ci motor won't start or get gas to carburetor. I put in a new feul pump & filter. It also has new injectors. Hi, if you fitted new pump have you checked that it is ...