...a gauge fitted where the oil sensor is test oil pressure when cold and at operating temperature. Loose wiring connection or faulty wiring to the sensor /gauge. Good luck, let me know how you get
...position sensor. New oil, oil filter, intake gasket, air filter. New fuel pump, strainer, and fuel filter. Still the same problem. Replace the pick up coil in the distributor,this is the
...running for 5 seconds with the ignition key set to the ON position. DO NOT START the engine when testing for the sound of the fuel pump/ If no sound of the pump is heard, replace the oil sensor ...
Question about Chevrolet S 10
...Oil and electronic part does not play well together, Please keep me up to day by appending to this post. Good luck. Please don't forget to rate: This code means this--P1336 Crankshaft Position (CKP) ...
...that are slipping on it's drive shaft. The oil pickup float may have a broken seam or piping. The oil pressure sensor may be defective or it's connection is loose. Less likely is a defective
...Oil Pressure Sensor on car?http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pressure-sensor-on.html-----------How to replace Oil Pump on ...
Question about Chevrolet S 10
...Oil Pressure Sensor AutoZone com A deep well socket may work.Here's what the part look's like. ...
oil pressure high oil pressure gauge stays at top about 80 psi replace oil pressure sensor.
...oil sensor on 1992 4.3L S-10 I am trying to change the oil sensor on my 1992 S-10 4.3L. I am running into a problem with how to remove the sensor. It is in a place where I cannot get a wrench or ...
...when I shift gears. the oil pressure sensor connector may be the problem.unplug the connector and see if there is a gray sleeve on the end if it is missing you will need to replace the ...
282 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions