...jack the control arm up a little and hit the ball joint up or down there is a clip you have to take off then hit it until it comes out. big hammers normally fix alot you just need to know were to hit ...
...fix? Jack up and put jack stands for safety or drive up ramps. Start engine and find whats rattling. You can use the back side of a hammer and hold against exhaust shield to see if the rattle stops ...
Question about Mitsubishi Cars & Trucks
...jack stands). Have someone try to go through the shift pattern (Rev, 1st, 2nd, 3rd, etc...). Watch the linkage, you may actually see where it is jamming. It is _highly_ probably it is simply an ...
Question about Cars & Trucks
...fix for someone with mechanical apptitude. just quickly running thru it, jack up vehicle, be sure to use proper support, jack stands ect remove tire, remove caliper bolts(these should be smaller ...
...JACK FROM A VARIETY STORE IT'S VERY IMPORTANT FOR YOUR SAFETY THAT YOU USE THE BEST MADE TOOL PRODUCTS NOT THE CHEAP STUFF CHEAP STUFF BRINGS CHEAP RESULTS TOOLS WILL BREAK IN THE MIDDLE OF THE JOB ...
...jack to press in and out. Thats the true definition of shade tree mechanicing and a hammer is the true definition of unacceptable ignorance. If you cant afford a repair or dont thoroughly understand ...
...FIX YA first jack up the van remove the wheel remove the brake caliper and rotor remove the axel nut then remove the three bolts on the back of the hub tap on the hub with a hammer it should come out ...
...fix the axel, it is wise to replace the axels by jacking up the car secure the car with jack stands, then remove the wheels, the big center nut of the axel and the lower bolts on the ball joint, then ...
fix for vehicles with drum brakes only. jack the vehicle on the side that has "frozen". place a jack stand under a sturdy part near area to be worked on. Remove lugnuts and wheel and set aside. find a
282 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions
