...lifter was collapsed would it still be getting oil up the pushrod? It is probably still getting oil, but if it is not moving as much as the other exhuast rockers chances are the cam shaft lobe for ...
what r the specs on valve add. on a 235 chevy six That should have hydraulic lifters, so at idle, loosten rocker arms one at a time till it clatters, then tighten till quiet, plus 1/2 turn.
Can any one offer any suggestions. Thanks your on the right track,change the dist.cap and rotor, if that doesnt solve the problem then you may have a bent valve or bad lifter or worn lob on the cam!!
...could be burnt piston, bad compression rings, burnt valve or head gasket. if the compression is ok could be lifter or cam. or maybe just ignition problem such as plug, wire, or coil pack, or ...
...valve cover, on a solid lifter cam, when the engine is turned, there should be one time, when the lifter is on the heel of the cam lobe a bit past the time when the valve you are watching has closed, ...
...carb be turning? I would expect about 4500 to 5000 RPM with stock engine and valve springs/lifters in good shape. An electronic ignition may extend this somewhat. Dual exhaust with low back ...
...lifter. If oil is low or dirty, change it and the filter. Could also be a loose connecting rod (not good) if it's a loud tap. There are other possibilities but stay with the oil check. Could be a ...
...between the top of the valve and the rocker arm in a 253 Holden V8? we are using hydraulic lifters and roller rockers with the adjustment screws. feeler gauges work
...valve, sticking lifter, bad piston ring all on the right side of the engine. The blue smoke is burning oil. Oil from the crank case is being compressed up into the cylinder and being burned. You will ...
181 questions posted
Usually answered in minutes!
363 Questions
210 Questions
125 Questions