...Chevy Suburban, 2500, 6L V8. Where does the fuel pump fuse reside?; in the fuse box under the hood, but what is its label? There is no fuse specifically dedicated to the fuel pump on this year and ...
Question about Chevrolet Silverado
...the wires? I don't use the cargo light so want to use that switch to run the off road lights You need that switch, only for the relay coil, for the off road lights,is that switch even rated for
if yes it is ingauged Fuel pump fuse is cut out by a relay and I believe the oil pressure switch. The goal is to have the fuel pump shut down automatically if there is an accident and the engine stops
Question about Chevrolet Silverado
...relay switch (located under the hood, driver's side wheel well) keeps shorting out and melting fuse panel 96 chevy truck, fuel pump relay switch (located under the hood, driver's side ...
Question about Cars & Trucks
...chevy express 2500. No power to window switch and circuit breaker is not blown. Checked switch, no power to it. Am I missing something? Can't find any help on this topic , no relays or fuses that i ...
...crewcab Inspected dimmer switch, omhed out good, nothing burnt or missing on cards, no faults found.Looking for a wiring diagram,bad relay or wire? air conditioner 2500 silverado in dash not ...
Question about Cars & Trucks
2010 chevy express 2500 cargo van wont start? ran direct power to fuel pump van started, but when disconected power van stop running? fuel pump fuse fuel pump relay ignition switch
...relay i disconneceted the oil pressure switch and tried to bypass the oil pressure switch and did not have enough current to click the fuel pump relay all i heard a rattle sound then i tried to ...
...relay switch to my heater on my 1994 Chevy 2500 Silverado? There might not be any relay, Mary - it might be wired directly from the switch to the blower motor, although the lower blower speeds may go ...
Question about Chevrolet Silverado
...relay switch is good, horn is good but it will no sound when pushing the horn on sterring wheel. What could cause the problem? your horn button and wiring is ground for the coil side of horn relay, ...
116 questions posted
Usually answered in minutes!
1,100 Questions
795 Questions
556 Questions
393 Questions
396 Questions