...serpentine belt...just go to your mechanic and they can put a new one on! Seriously, changing the serpentine belt is a messy annoying chore but easily accomplished. The belt is held in place by a few ...
...serpentine belt and ensure that the tention idler pulley is working good make sure it does not just move freely than get a new belt and install now you should be ok Hope this is very helpful for you ...
serpentine belt installation instructions. What do I loosen to get the belt off? there is a belt tensioner that keeps the belt tight you have to either use a serpentine belt wrench or a breaker bar to
...install a serpentine belt - Is there a diagram for the serpentine belt and how do I loosen the tension? If your Engine size, is a 2.5, you have to loosen the Alterntor, and the tighting bolt ...
...the pulley with a 15 mm socket and bar. Unbolt old tensioner and install new one. Reinstall new serpentine belt. It's a tight space but with patience and a good socket set it is relatively easy. ...
...serpentine belt and then loosen the bolt on the alternator. With the alternator loose, move it forward so that the alternator belt loosens up and then remove belt from the pulleys. 5 Install the new ...
Serpentine belt too tight to install I'm attempting to replace the serpentine belt on my 2000 Isuzu Trooper, and even after loosening the tensioner, it is way too tight to install. I've confirmed that
Question about Toyota Cars & Trucks
...serpentine belt The belt tensioner keeps belt tight. they do wear out, replace if necessary, make sure you have the correct belt and it i\installed according to mfg. Belts are not belts, they come in ...
Question about Chevrolet Corvette
...Serpentine belt was recently replaced. Any ideas of what could be happening? I recently got the serpentine belt on my 2005 v6 mustang replaced. Now, its started squealing on start-up. It quiets down ...
Question about Cars & Trucks
...serpentine belt? The belt when installing barley slides on the idler pulley when installing it. there are 2 marks on the tensioner, one stationary, one one the spring side idler side can the belt be ...
82 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions