1991 Buick Park Avenue "remove powerer steering pump" Questions

...remove the power steering pulley? To remove the pulley wheel from the power steering pump you typically have to remove 3 bolts but to get to those 3 bolts you have to use a socket and go through the ...

...steering pulley in front of bolt do i remove pulley, how? or do I remove sterring pump, how? You need to poke a small extension with a 13mm socket through the holes in the power steering pulley, undo ...

...steering pump is only held on by two bolts that are removed thru the pulley holes. Anyway you don't have to remove the whole motor mount just remove the nut that holds the mount just to the left of ...

...1990 buick park avenue power steering. I am using the engine for a speacial aplication and do not need the power steering pump why not just remove the pump and get a shorter belt from a parts

...remove power steering pump first to access a bolt for water pump. Is it right? YOU MUST REMOVE BELT, AND LOOSEN PS PUMP TO MOVE IT OUT OF THE WAY, BUT YOU DO NOT HAVE TO TAKE IT OUT OF THE CAR, JUST ...

do you have to remove the power steering pump pulley to change water pump you can rent a pulley puller, most folks however just take the whole pump off and hold it out of the way with zip ties.

where do I check the power steering fluid on a 2005 buick Remove the cap on the p/s pump tank. just behind the pump pulley. It's hard to get to.

...steering pump bracket in in the way of one bolt. How do I remove the bracket to get the h2o pump out? U must pull the pulley off the PS pump to get at the bracket bolts, for that u need a PS pulley ...

...remove the power steering pump? There are 3 13mm bolts that you can feel by putting your finger through the holes on the pulley.Remove these 3 bolts and remove the lines.Make sure and put a pan under ...

...front upper and lower studs and spacer. Lower the engine as necessary and rotate the tensioner to remove the drive belt. Remove the drive belt. Don't need to remove power steering pump if done right