1991 Buick Park Avenue "open car hood frozen" Questions

hood on my 1993 bruick wont open most likely a stretched cable or frozen latch assembly. The handle for your hood release has a cable behind it. Pull the cable off of the handle and use pliers to pull

...open hood because hood spring was meeting header. took some rocking hood while the other person pulled the latch repeatedly. But you see an elk damaged my front end so you may not have the same

frozen, how to unlatch the hood without it? if you can get a pry bar or a screwdiver under the hood and push on the mechanism that the cable pulls the hood will open.then you need to replace the cable

...open the hood and it's stuck in the closed position. I've pulled the release from inside the car and it is somewhat frozen. I've tried to access from under the hood and I can't figure out where the ...

...open? my car needs oil and the hood release latch is jammed or frozen how can it be opened. remove the front louvre grills and you will be able to access the cable Most of the time you can reach up ...

...open my hood? You have probably allready tried this but............. Have someone pull the hood release handle while you press down then lift on the hood a few times. ( down / up / down / up ) Often ...

Hood won't open Battery dead on my 1993 BMW 325I. MAin hood release won't work. There is no tension when I pull on the hood release. Can this be fixed? is it cold where you are? it may be frozen open.

...car while you're driving, the hood won't fly open from the wind as you drive) and you must slip your hand under the partially opened hood to find it and operate it. Sometimes tricky to locate and ...

...OPEN HOOD VIA INSIDE RELEASE. NOPE, NOTHING. THIS IS A "SE" VERSION. ANYONE KNOW IF THESE RELEASES ARE ELECTRONIC ?? OR DO WE HAVE A STRETCHED CABLE ?? stretched or frozen... have helper bang on hood ...

hood does not open. You can hear the cable moving but not unlatch the hood Get someone to press down the hood while you pull the lever should open when opened adjust the cable and grease the catch. It