1991 Buick Park Avenue "91 firing" Questions

firing order since the spark wires wouldn't reach for my 91 buick. You should have some knowledge about wiring before attempting that. Basically I just switched the wiring on each side inside the coil

i have replace my battery and ignition coil on my 91 park avenue i just purchase and still can not get a spark or fire to turn it over.. if the engine is not turning over i would check your battery ...

...91 buick park avenue firing order is out of whack.i found the order # they go in 165432 but where is the #1 plug and the #1 position on the distibutor itself located?? thanks The #1 plug is the first ...

...need to know how the wires from my control module match up to the bottom of my coil pack. I have a 91 Park Avenue 3.8l with the single unit for the coil pack NOT the three individual ones that also ...

1991 park ave ultra I drove for 12 hours, shut down to gas up. Car won't start. No fire to any of the 6 plugs. if the car cranks and your fuel pump works with no fire to the plugs then you've got ...

91 park ave wont't turn over with the key, checked battery, starter, and Fuses which were all fine. Engine starts when jumping at the solenoid then dies whenremoving the jumper. I thought it was the ...

I have a 91 buick park avenue that has had the coil pack, ingnition module, and crank sensor replaced. When you try to start it, it will not get the fire it needs to start. You crank it and it sounds ...

...and cleaned all the terminals and Battery. Fuel pressure is 45 psi . Any help would be awsome!!!! '91 Park Avenue, 3.8 liter. Best car I've ever owned, but recently having a similar problem. Starts ...

...the control box was tested and tested fine. What else could be the problem not getting any fire? 91 Buick Park Ave Try the nuetral saftey

My son was coming home from work in his 91 buick park avenue.Apparently the altenator went out and it caused a small fire which melted the belt. He has replaced the altenator,belt and small plug from ...