...radio and a/c light and i dont know how to get the face plate off of the radio tx bob burton Remove radio from vehicle. remove T15 torx screws on top and sides of radio. Remove knobs and outer bezels ...
WHEN TURN CAR OFF BEFORE REMOVING KEYS OR OPENING DOOR You have a bad wire on the back of your radio..a wire that controls your light display is not connected or an inline fuse is bad to that one wire
...then just do not hook up the wire that runs to the dash light which in turn dims the radio backlighting and you should be fine,if you need the backlighting to work properly then replace the
Radio Illumination Wire: GrayCar Stereo Dimmer Wire: Violet/WhiteCar Stereo Antenna Trigger: N/ACar Stereo Amp Trigger Wire: N/ACar Stereo Amplifier Location: N/AFront Speakers Size: N/AFront Speakers
...Radio Illumination Wire: Gray Car Stereo Dimmer Wire: Violet/White Car Stereo Antenna Trigger: N/A Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Front Speakers Size: N/A Front ...
light, radio and back latch button will not work Check your fuse box. The radio has power even when the ignition is switched off -- that's how the radio remembers the preset stations -- and that power
2000 blazer dash lights no dash lights not even in radio but radio works its ether a fuse or a grond more than likly
the alterantor works and i have lights and a radio but the truck wont start If the lights work and the motor will not "crank" you should FIRST attempt to jump start the vehicle with another vehicle. ...
change light bulbs in radio Be easier to replace the radio, check with local junkyard, they prob have tons of factory radios
the radio does not work it is hooked up with atape player and equalizer the radio lights up but no power to the equalizer and tape player so the radio also does not work no power to tape player how to
563 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions