...breaks? If this is the case the adjusters sound as if they were not brought in enough for proper clearance between the drums and shoes. If this is it I'd remove the rear drums and adjust for
Question about Chevrolet Blazer
looking for the valve (tappet) settings on my 1999 2.5D 2WD ford ranger (non Turbo) Hi Tom Valve clearance INLET 0,05 - 0.15 MM COLD EXHAUST 0,15 - 0.25 MM COLD
how can i fix my 1999 plymouth voyager if the oil light is on but it has oil in it? You should infact confirm it has proper oil pressure. For this you'll need to remove the oil pressure sending unit ...
...Either way my thoughts, for the noise, do go to the lifters being out of adjust giving too much clearance and clanking about in the top of the engine. If they are this far out this could interfer ...
low idle and low oil pressure and now valve clatter in my 1991 montero. is it feasible to replace the oil pump, if that is the problem, on a vehicle that has over 250,000 miles? i'd like to keep this ...
...solenoid starter package off. You can also remove the solenoid it you wish. It will give you more clearance, but may be more trouble than it is worth. You should see 3-4 bolts holding the starter
...get a new clutch and certainly a pilot bearing, too. Then again, you may be lucky and its just a clearance adjustment in the clutch slave cylinder. It sounds like the throw out bearing is
563 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
