1989 Chevrolet K1500 "axle clip" Questions

Ad

Question about Chevrolet 1500

3 Answers

Axle C clip removal I am unable to remove the C clips that hold the axles in place in the rearend of a '94 chev suburban. Whats the seceret? sometimes you have to use a prybar to pull the shaft ...

Ad

...gear pin in. Remove pin. Push one axle in remove "C" clip. Push other axle in remove "C" clip. Pull axles out. Pry seal out. Using slide hammer pull axle bearing out.. Need some good testimonials

Ad

Question about Chevrolet 1500

1 Answer

clip by putting it on the axle and sliding it back in and finally tapping it in place. Is that the correct way of doing it first off do you have the other clip from the axel?or do you know were it is?

Question about Chevrolet 1500

1 Answer

...axle on my 1997 chevy silverado 2wd? you need to remove the bolt from the shaft that holds the spider gears in then slide it out then push the axle in and clip will fall out or you can pull it

Question about Chevrolet 1500

2 Answers

...axle shaft clip apart from the diff. on a 2004 chevy 1500 with a needle nose vice grips Pull rearend cover off look for a 5/16 bolt going thru center of pin if you don't see it just spend ...

Question about Chevrolet 1500

2 Answers

how to rear axle on chevy express van 1500 You want to know how to remove the axle correct ? There are clips inside the rear carrier that hole the axles from running out . You need to remove the the ...

Question about Chevrolet 1500

1 Answer

...push the axle into the differential and you may the C clip fall if not remove the C clip to unlock the axle and pull the axle straight out without turning it as you pull.install in reverse

Question about Chevrolet 1500

1 Answer

holds the differential pin in. Remove the pin. Push the axle in and remove the C clip. Then pull out the axle. Replace the pin so the spider gears don't fall out if you turn the diff with the axle out

i have the reardif cover of and i need to take the axles out so i can replace the rear seals on both sides of the axle but i can not figure out how to get the two keeper pins out so i can remove the ...

Question about Chevrolet 1500

1 Answer

...out they also center the ujoint in the yoke on the rear axle.If you dont have a clip groove then you may have the wrong ujoint.Look closely at the old ujoint and you should see what I mean.Good

Not finding what you are looking for?
Cars & Trucks Logo

353 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...