1989 Chevrolet Corvette "time" Questions

...down, pulled four prong plug from distributer (per service manual) car would not start in order to time How to check and adjust the timing Disconnect the tan/black wire EST (electronic spark timing) ...

when do you replace a timing belt Timing belt should be replaced around 60,000 miles but, some times it can last even 100,000+ miles, but it is always to be safe. Good luck

timing chain is on engine,is #1 cyl. at tdc? it could be a hafe round of timeing the timeing marks are cam gear dot down crank gear dot up

I SHUT OFF MOTOR SOMETIMES IT WILL TURN OVER BUT WILL NOT START TILL I WIAT ABOUT 3 MIN. HAPPENS ONLY WHEN MOTOR IS WARM. HAS HAPPENED ONCE WHILE DRIVING JUST SHUTS OFF. DOES NOT MISS OUT ,OR SPIT AND

The engine turns over, acts like it wants to start when it's first rolled over, then will not fire after that. Someone suggested timing chain or belt. It's a 1993 Chevy Lumina Euro - 2Dr, 3.1L - ...

...distributor, you can follow it from there to the connector. All of this aside, my favorite way to time one of these with any system, is to get an advance timing light, dial up 42 degrees, bring the ...

...not start Running on freeway at 60+ MPH engine quits for 15 seconds restarts on its own. Second time stops completely a week later restarts after a couple of minutes. Third episode... quits five ...

Some times my key FOB opens the drivers door lock, and other times it does not? It seems to open the passenger side without fail, but the drivers side at times requires the key to open it? Any ideas? ...

...psi running. also replaced fould out plugs.still runs the same.dissconnected all sensors one at a time with no change.any ideas check the vacume pipes for leaks and cracks. Im hoping this is the ...