1989 Chevrolet C1500 "ignition control module location 89" Questions

...installed new battery this afternoon; as soon as i did the heater blower fan came on ; no keys in ignition; now won't stop running? replace the blower speed control module located near the blower ...

89 dodge w100 ignition control module location The ICM is inside the distributor housing. A small, rectangular box with a 4 wire electrical plug.

control on and when i did the truck turned off. It has power and everythings works but it wont start back up. It cranks and everything but no fire. Thanks 1989 20yrs old ,well it must have an ignition

...sensor and Distrib.Ignition control module. what do you think. Should I change the fuses or plugs and wires first their going to need them anyways or I have no idea where theIgn. control module ...

...Ignition Control module located on a 1990 Ford f150 My pickup dies while driving down the road. After it sets for a while it will start. I tried the fuel shut off button. I was advised it may be the ...

...Ignition control box is actually termed an ECM (electronic control module) in those days, later changed to PCM, per the J1988 EPA standards. On the 1989 TF pickup, it was located typically under the ...

...long it will run before it dies. I have changed the fuel filter and pump but still having issues. Ignition control module. Those are notorious on the older fords. It is located under the

...after checking the output of coil- no spark. voltage regulator? coil? or??? plez help More than likely either the ignition control module, the stator or the pick-up located in the

...ignition module and the pick-up coil/stator located inside of the distributor is actually what generates the signal that the ECM (Engine Control Module) uses to time and fire the fuel injectors, as ...

...ignition controle module, this is a common problem with some modules. Once it gets hot it will cause the car to shut down. You can remove it and get it tested. It can be located in one of two ...