1988 Chevrolet Caprice "distributor" Questions

distributor replacement of distibutor The distributor is on the back of the engine (that's the side that the transmission hooks up to). You will need a socket set and a paint marker (you might need a ...

...attached to the computer that go out to different parts in the engine. on tbi chevy engines with distributor cap style ignition the fuel injectors will be disabled if ignition module loses input ...

need hei distributor wiring diagram That distributor is an easy one. You need to connect the harness attached to the distributor housing to the cap. There is a marking on the cap that says "Batt" ...

how to replace the pick - up coil under the distributor you have to remove distributor then remove distributor shaft then you can get pick up out

intake manifold gasket i changed it out all good but i'm stuck on the distributor. when i try to start it catches on fire in the carburetor?what should i do from here? make sure the #1 cylinder is at ...

1995 chevy caprice classic 4.3 v8 I have put new plugs,wires,coil, distributor cap, and all sensors on this car. When its cold it runs like a new one,when it gets hot it wants to skip.What could be ...

...one at a time, for replacement. Fig. 1: 5.0L (VIN Y) Engine Engine Firing Order: 1-8-4-3-6-5-7- Distributor Rotation: Counterclockwise Fig. 2: 5.0L (VIN E) and 5.7L (VIN 7) Engines Engine Firing ...

seconds then dies The two main suspects would be the fuel pump or the ignition module inside of the distributor. You can remove your ignition module from the distributor and have it tested for free at

distributor cap how do i time my distributor with out the lite You cannot get it precise, but you can either put a vacuum gauge on the manifold and advance the timing to the highest vacuum reading, ...

1993 chevy caprice 305 distributor cap's firing order in relation to the mark on top of the cap above the square slot opening. Need code for firing distributor its not on cap?