1988 Chevrolet Camaro "skinny dipping" Questions

unscrewing. It helps to have a good variety of socket wrench extensions and a universal joint and a skinny arm to get behind the box. The fifth bolt is about 3" in from the upper right bolt. Same size

...find but its there. With the car running check the fluid level. If it is low than you will need a skinny funnal and remove the dip stick and install your fluid

...like so i will know what to purchase The hole for the transmission dipstick should be a very skinny metal tube that comes up along side your engine from underneath. As far as the stick it is ...

its a very short one it on the front of the transmisson. Using a transmission funnel (it has a long skinny hose) pour fluid through the dipstick hole. Good luck and thanks for using FIX YA, contact if

where to put transmission fluid in lincoln ls 05 you need a long skinny funnel ,find the transmission dip stick most likely to be on the driver side under hood place funnel in dip stick hole and pour ...

...on the dip stick for the tranny will be one pint per mark. To add transmission fluid they sell a skinny long tube funnel that goes directly into the stem that holds the dip stick. You must shut

...Delta 88? Thanks! it goes in the same hole that the dip stick came out of. use one of those long skinny funnels to put it in. check often, you dont wanna over fill it You fill it through the ...

...is on the driver side on the motor .most likely is a yellow or orange color..you gonna need a long skinny funnel or one that fits the hole where the dipstick goes good luck and make sure you do not ...

...up? If you are talking about the POST cat, then no, Those cars are low and unless you are really skinny then I don't see how you could. The only way I could think of maybe being able to is to pull ...

...put in, the same place of the DIP-STICK-HOLDER, hard to believe but its true, u need a skinny-FUNNEL TO match th size of the hole, a little-long, & pour a little @ time, and keep ...