...set the timing with a timing light. If you have an automatic transmission, I think the timing is 6deg BTDC. Tighten the distributor down and connect the ETC wire. For future reference, its a tan ...
...timing light to set it at 8 degrees(while its running)once you set it to where it needs to be then tighten the distributor and plug that wire back in,its for the computer for electronic ...
...timing set at for a 1991 Camero 305 V8 ? What degree do I set my engine to for a 1991 Camaro 305 V8 ? Try 0 degrees. It should state it on the radiator cover, but mine didn't. I tried 10 advance and ...
...set ignition timing, ensure that engine is at operating temperature, (190 degrees or above), bypass EST (electronic spark timing) by unplugging the single tan wire with a black stripe from the ...
...Set the timing to 0.deg and turn off engine before reconnecting brown wire. Computer will automaticly set the timing. There is no 1 wire that controls the timing adjustment. Your Suburban is equipped ...
Question about Chevrolet Camaro
...timing set after the distributor is replaced? This is late but may be useful for info purposes. The 1999 Nissan Quest carries a distributor and spark plug wires. Many owners complain having to go ...
...timing is set....Any minor adjustments must be made electronically.... If you have a distributor, follow below:- Once you're sure of the valve timing, set the engine to TDC with number one piston, on ...
Question about Nissan Cars & Trucks
...set timing to 7 degrees, runs better on 8 degrees but it's still jerking. 1983 Nissan 1400 champ Recently started just cut out and wouldn't start until all parts mentioned changed. Have you checked ...
...timing is set correctly, look to see if you are getting 12 volts to the positive connection on the ignition coil. If that is good but you still don't get spark, you may have a bad electronic pickup ...
Question about Chevrolet Camaro
...set the timing on a toyota 4y engine with an electronic ditributor? the old distributor was changed with an electronic one Set No. 1 to TDC/COMPRESSION. To set in the following manner. a. Remove No.1 ...
236 questions posted
Usually answered in minutes!
737 Questions
576 Questions
468 Questions
391 Questions
331 Questions