1988 Chevrolet Camaro "distributor" Questions

had sparks from coil, bought new coil same problem, bought new distributor, now car will not even start By distributor, is that the cap or the whole piece of aluminum- housing with stator assembly/ ...

I brought a chevy caprice, it needed a distributor and the person who owned the car took the all the parts off to change the distributor. I put the distributor on the car but I cant find where two of ...

replace distributor 1994 Chevrolet Camero 5.7 engine needs to have distributor removed so mark distributor base to block, then mark rotor position, take it out. when you reinstall put your rotor on ...

1982 camero z28, engine 305 , carburator, 2-barrel Have replaced rotor, distributor cap, spark plugs and wires, replaced the coil. Checked the pick up coil and capacitor and was good. The problem is I

i cannot find the numbers on my distributor on a 1984 chevrolet camaro with a 350 engine the casting numbers are stamped on side of distributor, on ledge where distributor cap goes onto The numbers ...

will a distributor cap cause a car not to start? Yes. There can be a crack in it that will short out, it can be crudded up with carbon, eroded away. A bunch of things. It won't start, and if it does, ...

...in a 2. 8 Resetting the timing is easier than it sounds. You can "fine tune" the timing using the distributor. First be sure the plug wires are connected properly to the distributor cap and spark ...

...wont spark. It wont start. How do I fix this. Is it a miodule issue? No it is likely the OPTI SPARK distributor has failed, it is the Achilles heal of the LT1 V8. The distributor is located under the ...

...troubleshooting tree for code 36 optical module. where is optical module on 94 camaro? Code 36- Distributor ignition system. Faulty high resolution (360X) pulse or multiple low resolution pulses ...

I have a 1996 z28 on my 7th distributor they dont last 1000 miles and the car is not driving hard at all. the distributor is stock . Thank you Larry you need to check the wiring for the distributor ...