1988 Chevrolet C1500 "steering wheel loose" Questions

...most likely your steering linkage is worn out. But it could be loose wheel bearings, worn out suspension bushings, incorrect front end alignment, loose steering gear bolts, or worn out steering

...Steering. Steering wheel moves side-to-side and up and down. You need to remove the steering wheel all the way down to the directional switch to gain access to tighten up the tilt housing set ...

...steering wheel, i removed steering wheel and now im stuck, how do i get past parts under steering wheel when it is removed, 1992 k 1500 chevy silverado 1/2 ton ...

...steering wheel off center to left Replaced balljoints and aligned, has steering sensor. Truck went out of shop straight and steering wheel straight. Customer calls week later and pulls left and ...

...steering wheel on my 1988 Chevrolet P/U 2500 series suddenly became very loose and wabbly inside the cab. It still steers fine, but would like to know if there are bearings or something else that ...

...the three you were talking about? (This is the Chevy C1500 steering wheel question lady) If the steering wheel being loose is the origional problem, then those are the bolts that need to be

...steering wheel loose my turn signal on the right wouldnt make the "click" in place and would not signal properly or made a buzzing noise like it was tryin to turn on... i narrowed it down to the ...

...steering wheel of my 94 chevy silverado. How do I fix it? play in the steering wheel for that truck is more than likely caused by worn tie rod ends, and sometimes ball joints. The steering box is ...

...steering wheel and lock plate, you will find four inverted torx bolts that hold the tilt bowl to the column. Two will be backed way out and loose.Remove these bolts and appy loc tite to the bolt ...

steering wheel moving around..hubby took it apart and thought it maybe the lever that makes the wheel go up and down, but that is not the case..any ideas? He will have to remove the steering wheel and