1988 Chevrolet C1500 "replace door pins chevy" Questions

...door. You will need new bushings. If you find that the bushings are not fitting snug to the hinge, loose, you may need to drill the hole out a bit bigger, and use an over sized pin and bushing to ...

...replace the door hinges. There are many places to get parts. Dealer is the one spot. To locate a place on line, do a Google search on Chevy pickup door hinges, and you will get at least 30 pages of ...

...need to replace the door hinge pins and bushings. Make sure the instrument dimmer knob isnt all the way up. If you can push in on the switch and the light goes out, then you have found the

door, this pretty much eliminates the B+ circits and the grounds for the driver's switch. Since the passenger switch itself has been replaced twice, I would think that eliminates the switch itself

replace the top and bottom door hinges on both sides. I don't know how they are attached at the body. its probably the door hinge pins. use a floor jack to support the door. have it jacked up slightly

...jack under door to hold up take a big screw driver pull spring out the use screw driver to drive both pins out thenpull door away from truck replace bushings then put door back put pins back in ...

...replace door? the door henges are welded on the s10 you will need to remove the henge pins in order to remove the door, get some help! it will take 2 of you to get the door off and a floor jack helps ...

...replace the hinge pin and bushing kit,on the drivers side door on a 1999 Jimmy 4.3 1994 to 2003 Chevy 10 GMC 15 Blazer and Jimmy Door Hinge Pin Replacement this should help you I think is the right ...

...an 03 chevy 2500HD duramax for door light the swith need to be replaced and also check fusses always check the door pin with test light first see if there is current if there is then its the door ...

...replace door hinge pin and bushings without a spring compr do not have a spring compression tool. Harbor Freight has the tool for $3.99. I just bought one last Friday and replaced my hinge pins this ...