Ignition Timing Following Top End rebuild, engine started. Went to check timing, engine runs well, timing mark on harmonic balancer not visible, turned distributor all the way to get mark in view, ...
when do you replace a timing belt Timing belt should be replaced around 60,000 miles but, some times it can last even 100,000+ miles, but it is always to be safe. Good luck
timing chain is on engine,is #1 cyl. at tdc? it could be a hafe round of timeing the timeing marks are cam gear dot down crank gear dot up
...it wants to start when it's first rolled over, then will not fire after that. Someone suggested timing chain or belt. It's a 1993 Chevy Lumina Euro - 2Dr, 3.1L - 111,000 miles engine will turn ...
trying to find my EST connector in my 1980 corvette. I'm having problems timing the engine of my 1980 corvette. I understand that the EST connector must be disconnected before the timing adjustment ...
cranks but will not start Running on freeway at 60+ MPH engine quits for 15 seconds restarts on its own. Second time stops completely a week later restarts after a couple of minutes. Third episode... ...
Some times my key FOB opens the drivers door lock, and other times it does not? It seems to open the passenger side without fail, but the drivers side at times requires the key to open it? Any ideas? ...
...the dust will settle and stick to them, then engine will not get right information, also check the timing as a belt stud in the same place for a long time can stretch and even mold to the engine a ...
I SHUT OFF MOTOR SOMETIMES IT WILL TURN OVER BUT WILL NOT START TILL I WIAT ABOUT 3 MIN. HAPPENS ONLY WHEN MOTOR IS WARM. HAS HAPPENED ONCE WHILE DRIVING JUST SHUTS OFF. DOES NOT MISS OUT ,OR SPIT AND
198 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions