1986 Chevrolet S-10 Blazer "seal" Questions

Ad

Question about Chevrolet Blazer

2 Answers

transmission rear seal instalation how to install rear seal transmission remove the drive shaft ( tail shaft) lever out the old seal. put sealer around new seal and fit back in extension housing. Use ...

Ad

Question about Chevrolet Blazer

2 Answers

rear oil seal leaking. how to fix If your sure the rear main seal is leaking then the engine and transmission have to be separated. It is easier to remove the transmission. If it's an automatic then ...

Ad

i need to change the real seal in my 94 S10 blazer and i don't know what I have to do! please help? Hello wizardofoz17: My name is Roger and I will help you. By replacement of the rear seal I assume ...

Question about Chevrolet Blazer

1 Answer

96 chevy blazer rear axle bearing/seal r/r i keep throughing out my rear axle bearing does the axle bearing/seal kit need to be pressed on the axle No. Did you run some emery cloth along the race ...

Question about Chevrolet Blazer

2 Answers

...pulling the fuel pressure regulator (N) and using a shop towel to catch any spilled fuel Regulator seal O-ring (R) and discard the O-ring seal Regulator filter (Q) and discard the filter Regulator ...

Question about Chevrolet Blazer

1 Answer

Transmiision for 1994 Chevrolet s10 blazer What kind of rear seal do I need for and automatic transmission for a 1994 Chevy S10 Blazer if its the rear seal where the driveshaft enters the trans you ...

Question about Chevrolet Blazer

4 Answers

...wrecking the piece its attachted to? this is a last ditch attempt- first of all make sure it is a sealed unit -not an element type. then with a hammer knock a long screwdriver right through it-

...either the timing chain or the front main I have oil leaking from either the timing chain cover seal or the front main bearing, but only when the oil is hot. The timing cover has two ports, one

leaking oil really bad and need to know how to replace seal drain the oil, remove the pan peel off old seal replace with new seal in pan and put the pan back on thighten down and refill to ...

Question about Chevrolet Blazer

2 Answers

my drive shaft leaks, how can i fix it? remove it and replace the rear seal I bet the seals were the drive shaft goes into are the problem. If its the transmission side simply remove the trans and ...

Not finding what you are looking for?
Cars & Trucks Logo

233 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...