1985 Chevrolet Corvette "remove max engine cover" Questions

Ad

Question about Chevrolet Corvette

1 Answer

...remove the housing. Clean the surfaces on the housing and the mating surface on the engine, once clean, apply Copper Plus RTV sealant (or similar) to both sides of the gasket that you bought when you ...

Ad

...max 2.4 ltr is the oils light on? is the Pressure gauge working?? If you can't tell, Next step,. Remove a valve cover and start engine for 15 seconds and you should see oil, A lot of it, If not your ...

Ad

Question about Chevrolet Corvette

1 Answer

engine cover removal on s-max ran out of diesel and looking for hand priming pump but cant get to it I would recommend loosening the fuel filter and then applying air for a compressor to the fuel tank

engine. On the Mitsubishi 4 cylinder motor, the only thing that is needed to do is remove the valve cover and remove the rocker rod. (2 rods which hold the rocker assembly.) Next is remove the lifters

...remove the intake manifolds and replace these gaskets before the valve covers. The valve covers are just plastic covers for the valves-one big box. Put new gaskets in place and reinstall the reverse ...

Question about Chevrolet Corvette

2 Answers

engine should be at operating temp and the truck level remove the dip stick and wipe clean then reinsert and pull out the fluid should be in the hass maxs. if this truck is manual trans then the trany

...Remove cylinder head cover (Refer to 9 - ENGINE/CYLINDER HEAD/CYLINDER HEAD COVER(S) - REMOVAL). (3) Using the crankshaft barring tool #7471-B, rotate crankshaft to align damper TDC mark to 12:00 ...

Question about Chevrolet Corvette

2 Answers

...no heat. I think I need to relace the blower motor, if so do I need to remove the dashboard? check the fuse No. Pull out right front inner fender well cover and motor is on firewall. Four bolts

...MAX ENGINE SIZE 3.0 V6 4X4 5SPD your going to have to pull back carpet and clean any liquid up and start your truck and watch for original source of leaks,have you removed the plastic cover of the ...

Question about Chevrolet Corvette

1 Answer

...remove this (?) and I can't see what the level of the brake fluid is becasue the max/min lines are on the side of the reservoir and are hidden by the engine. How do I check the brake fluid level? ...

Not finding what you are looking for?
Cars & Trucks Logo

362 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29490 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...