...gear. Won't shift thru the linkage. Has been freed up before by Corvette Specialitys in Riverside, Ca. They unstuck the linkage but had no answer to fix. Took to have smog test done put on dyno and ...
...gear. I can shift through 2-5 and reverse without any problem. But when I try to shift into first it feels like something is stopping It from sliding into gear. It doesn't grind or anything. It ...
Question about Dodge Cars & Trucks
...goes into drive gear, suspect a shift cable or shifter assembly problem. If you can't manually shift into drive gear by hand with cable disconnected, suspect internal transmission/shift linkage ...
gear shift problem linkage with gear shift problem. Gear shift linkage inside console is dis-connected. Ball joint connecting gear shift to transmission shift rod.has broken nylon insert at ball joint
Question about Chevrolet Corvette
...gear shift to the transmission that can be adjusted. If it is the indicator, then it is in the gear shift mechanism proper. I don't think it is possible for the transmission to change the angular ...
...shift into any gear out of park,just slides back and forth.Is this a linkage problem? Yes, most likely. The linkage needs inspection from the shift lever to the transmission. You may have to check ...
Question about Chrysler Cars & Trucks
problems. These components connect the gear shift lever to the transmission. Inspect and replace any damaged parts. Remember that diagnosing transmission issues usually requires professional expertise
Question about Nissan Cars & Trucks
...shift fork to rail detente balls bad or spring bad to ball. 4; wrecked 5th gear syncro ring. (cheap easy fix for a gear head.(me) 5: -5th gear syncro dogs on the gear wrecked, wrong and bad. 6: ...
Mk3 golf gti stuck in 5th gear cant move the gear stick. CHECK THE SHIFT LINKAGE. TO RULE OUT INTERNAL TRANS PROBLEM,. REMOVE SHIFT LINKAGE AT TRANS AND SEE IF YOU CAN MOVE SHIFT LEVERS
...gear shift handle is loose and there is a clacking noise outside the car when I shift it. The shift linkage is probably off or loose, does it go into gear?, if not , there is a problem with the ...
362 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions