1983 Chevrolet S-10 "rpm needle stuck" Questions

...of linestart truckthrottle engine to high rpm 3000rpm until it runs out of gasreconnect fuel linestart truckthis may wash the dirt out if not carb will have to be dissassembled to clean needle and ...

rpm needle does not work how can i fix? on my 2004 buick lesabre my rpm gage and my gas gage stop working when i turn the car off the gas needle stays way down below the F and when i start the car the

...rpm needle is stuck right round on maximum/ full revs, think it flickers a bit when cars on, what is the issue? is it stuck due to dust &moistre? because the engine and whole car is 100% michanicly ...

how can i reset the rpm gage it is stuck on the max Is it stuck behind a limit pin? If yes you will have to remove the cluster, take it apart and physically move the needle to the other side of the ...

...rpm gauge won't work Have you checked the fuses? Without knowing all the details I would guess fuse or ground out somewhere along the line. Also chk to see if the needle is stuck under the pin. ...

needle on temp guage and rpm guage not go back to zero when motor is turned off? I had a similar problem, it was my fuel and spedometer though. If you turn the car on and off a few times, they needles

...RPM and MPH needle got stuck together but when I tapped the panel they went back to normal. Why is this happening and how can I fix it. The battery is failing Battery or voltage regulator in the ...

...rpm needle back to zero is to turn the ignition on/off few times. Each time it goes down by a small fraction. it happens in the city driving as well as highway, not everyday day, about once every ...

...rpm's than normal & the needle seemed to fluctuate more than normal; didn't seem to be the tranny stuck in 3rd or anything?? wondering if it's a gauge problem, a sensor problem, tranny problem, turbo ...

needle stuck behind peg now this is funny, seems the turbo, waste gate stuck and the rpm hit 12000 and it bent the stop pin, wow,, can we have a video of that.??? end jokes.... sorry. but I do lots of