1983 Chevrolet Malibu "remove timing chain cover chev" Questions

...Remove the camshaft sprocket and the timing chain at the same time . . . Fig. 5: . . . then remove the tensioner assembly Fig. 6: Compress the tensioner spring and insert a cotter pin or nail in the ...

...timing chain line up marks for the two upper cams on a 2.4l quad chev engine. have the crank no problem. remove the rocker cover and look at the back of the cams first ,also turn over with a socket ...

remove the front timing chain cover and the chain tensioner. For details, please refer to the procedure located later in this section. Unfasten the water pump-to-cylinder block bolts. Remove the water

...timing chain may have went bad. Causing the pistons to come up and hit and bend the open valves, if the valves don't close completely, you'd have no compression. I would remove the valve cover and ...

...remove the no 1 spark plug and rocker cover for no 1 bank place a length of small diameter wire in the plug hole and slowly turn the engine over until the wire stops moving up and starts to go back ...

...timing chain cover and it was fine. We removed the plugs and turned the engine by hand to see if we could feel anything unusual. It turned fine but I noticed only the left three valves on both sides ...

...remove the red add fluid cap is on top of the chain/side cover which is underneath the exhaust crossover in front of the air valve. I used a turkey baster with the bulb removed and used a funnel into ...