...bolt and line up timing marks. cylinder #1 at top dead center and valves for cylinder #1 closed. remove harmonic balancer bolt and remove cam gear bolts and crankshaft gear, install is reverse
Question about Chevrolet TrailBlazer EXT
dead center. Remove the bolt and install the TDC peg. Rotate the crankshaft clockwise against the peg. NOTE: Installation of the alignment tool into the exhaust camshaft may require the camshaft to be
...dead and I think that ithe timing belt came loose or broke. Since the engine is n interference engine and likely damaged the engine, how can I test to see if the timing belt is broke? Will a code ...
...dead center on #1 and lined up the mark on 05 on the cover. Then lined up the **** marks near the timing gears all together. Make sure you get the tension-er tight after this ,nothing worse than ...
...dead blow or rubber mallet to tap the cylinder head to be able to remove it. Set to the side in a safe area. Warning: Cylinder head bolts have a specific sequence that is used when removing them. ...
Question about Isuzu Cars & Trucks
...Dead Center (TDC) of the No. 1 cylinder's compression stroke. Remove the timing belt tensioner adjusting bolt and the tensioner from the engine. Remove the timing belt. install is next Install the ...
...dead. Had to take valve cover off and tighten bolt. He said it was worked on before so was done at engine factory and repaired. They had hole too big so it had to be retapped. They had put sleeve on ...
...Dead mouse in the AC/Heater fan 3rd time for me and $200-$400 each time the dealership cleans it out. So today I did it myself and now mad I spent $800 prior. It?s a bit of a job but once you do it ...
...bolt). STEP 7 Place the engine top dead center and Zero the engine. The markings on the camshaft sprockets and timing cover should be in alignment as also should the marking on the crankshaft. Use ...
...dead. i tried to un screw the bolt and i cant get it loose. need help Ignition switch needs to be replaced, common problem. To get your key out: look under the key on the column cover. You'll ...
288 questions posted
Usually answered in minutes!
10 Questions
294 Questions
228 Questions
50 Questions