2005 Chevrolet Silverado 3500 "horn fuse" Questions

...right. It will blow once in a while. What could be the problem?? you are either getting water in your horn, common for trucks, or it could be a bad ground. have you ever blown the fuse for the

...horn fuse, where is the horn relay? horn fuses keep burning out, thinking it is the horn relay disconnect the horn or horns, operate the horn and see if the fuse still blows. if the fuse still blows ...

...fuse blows. Horn works ok when locking the car with remote when the fuse is blown. you may need to put a relay in it as the current from the horn may be back feeding up the immobiliser horn circuit ...

...fuse and horn worked for a few "toots", then fuse blew again; replace horn relay and fuse. Relay clicks, but no "toot" when horn switch pressed. But horn "toots" when "key lock' set via security ...

...horn fuse for 94 honda civic DX my horn doesn't work, might be missing the fuse check the fuse if the fuse is good use a test light on the wire going to the horn if it lights up when you press the ...

horn does not work, i need to a fuse diagram to change the fuse as the manual is missing these pages.. Check ALL the fuses with a 12 volt test light. Change all that are burnt. Also.....check the wire

...and could not locate any blown fuses. Should there be a fuse for my horn? the fuse for ure horn is under ure bonnet mate the fuse for the horn is in the fuse box under the hood on the passengers ...

Horn fuse that is blown. try by replacing the horn relay in fuse box, check the fuses also. if it still does not work. remove wire from horn under hood. use a test light and put on end of wire to horn

...fuse for horn do ownersw manual does not list fuse for horn do not hear the relay engage or i do not know location of relay i assume it is with the fuse block under hood need wiring schmatic please. ...

...fuse , horn switch, horn itself or wiring. if you have a multimeter place across the horn terminals on dc volts and have a friend sound the horn, do you get 12 volts on multimeter, if not then your ...