2005 Chevrolet Silverado 2500HD 2WD "tell ignition cylinder bad" Questions

wheel wont lock when you turn it so that tells me the transission is in drive but the shifter is in park and he said he cant move it. he cant turn the key back or forward ignition lock cylinder is bad

...tell you specifically which cylinder(s) is/are mis-firing, nor why. Symptoms may include: * the engine may be harder to start * the engine may stumble / stumble, and/or hesitate * other symptoms may ...

...ignition switch. Is there such a thing? This is just a suggestion. Make sure it is all the way in park there is a safety fetcher in the shifter. Your starter would only click if the solenoid was good ...

...cylinder No.2. Either the sensor is bad or the wiring to the sensor is bad. The knock sensor detects when pre-ignition (pinging or knocking) is occurring and tells the computer. The computer then ...

...cylinders misfiring on one side Fouled spark plug or plugs or bad ignition coil or coils. Your OBD2 TEster should tell you which cylinders to check. run a scan -problem from bad plug to failed ...

...Ignition control or misfire code. How can I fix that ? the code reader should tell you what cylinder it is if so switch the injectors around to see if the misfire moves to a different cylinder if it ...

...tell you the cylinder has a bad valve. Hope this help (remember comment and rated this). To check compression on any engine, disable the ignition system and remove all spark plugs. With the gauge ...

ignition coils, one on top of each cylinder where the wires go. The front and back are different designs. Nissan dealers will not replace just one, they will tell you all need to be replaced for about

ignition unit that is not firing #3 cylinder, With the #3 cylinder not firing it caused the 420 code that means the catalytic converter to be below acceptable efficiency for emission standards. Repair

...ignition coil symptoms relaced wires and plus.need to find bad one coil or do I buy one and move it till I find the right one Depending on the make model and year, you may have a trouble code stored ...