2004 Chevrolet Silverado 3500 "replace actuator drivers side" Questions

...replace the battery today now when I turn the ac on the drivers side is cool and the passenger side blows hot air. There is a electric actuator that controls the vents and they may have lost there ...

have auto a/c there is a separate actuator for the pass side and the drivers side temp control. You may need to replace the drivers side actuator. Where is the Driverside actuator  located at????

...replace the drivers side actuator (Part Number 15844096 - $38.46 at Chevy dealer). The passenger side actuator is also the exact same part number. They are both located under the dash, about equal ...

...REPLACE DRIVER SIDE ACTUATOR TO OPEN AND CLOSE DOORS. Here's a great video that will show you how to replace your door lock actuator. Remove the driver side door panel - follow rod from manuel lcok ...

drivers side door actuator Door Lock actuator ? Inside the door , have to take inside panel off ! There are videos on youtube showing how to replace the actuator on most make , model an year vehicles

...replace the driver side blend door actuator in a 1999 cadillac deville Air Mix Actuator Replacement - Driver Removal Procedure Remove the right sound insulator. Refer to Instrument Panel Insulator ...

actuator. there are two electric motors that move the temp doors from cold to hot. there is one on the drivers side and one on the passenger side. you will need to replace the one for the drivers side

...actuator for the drivers side is locted on the drivers side under the dash on heater box, the blower is on the passenger side , you can check connections but i do not think it is that but rather the ...

...actuator for the drivers side heater that opens the temp door. this motor actuator needs changing. so it is stuck in heat mode and now motor will not move door to cold. common issue w/GM products ...

replace the RH Blend Door Actuator, my manual only has pictures...Blend Door Actuators - ReplacementNOTEPressing the mode select switch with the ignition on, will cycle through Vent-Bi/Level-Floor-Mix