...to shift it?? Be sure to drain the oil our first, also a 1 ton floor jack would be handy to let the unit to the ground after prying it loose from the flywheel (Bolts taken out of course
Question about Chevrolet Silverado 1500
...ton floor jack, it is about 3 years old, the problem is: once I jack up a car, lawnmower, etc it will come back down on its own after a while. I don't know much about jacks, the only thing I do know ...
Question about Chevrolet Silverado 1500
...floor jack and stands to lift my truck but which one should I get? 2.0, 2.25, 2.5 or 3.0 Ton? THE SAFEST CHOICE IS THE 3 TON.. YOU COULD GO WITH THE 2 OR 2.5 TON, BUT WITH THE SIZE OF YOUR TRUCK YOU ...
Question about Chevrolet Silverado 1500
...floor jack from a autoparts store will be fine and strong enough IF THIS WILL BE A JACK YOU USE OFTEN I WOULD GO FOR A 2 1/2 OR 3 TON.THE LARGER JACK WILL GIVE YOU MORE LIFT . YOU DO NOT WANT TO ...
...floor jack to help hold up car for safety. The starter will be located ton the passenger side. It is held by two bolts. There will be one wire to a 10 mm nut. remove. There will be a couple of wires ...
How do I refill my MVP SuperLift 2 ton floor Jack? What what liquid do I use to refill? hydraulic jack oil. or like me use regular transmission fluid
Question about Cars & Trucks
...ton long frame dual piston floor jack refill process? =release the valve so no pressure in cylinder. -clean area around filler hole on both cylinders -use compressor to blow out area so no ...
Question about Cars & Trucks
...ton-aluminum-racing-floor-jack-with-rapid-pump-62160.html https://manuals.harborfreight.com/manuals/62000-62999/62160.pdf 1 5 Ton Aluminum Racing Floor Jack with Rapid Pump Here's the manual ...
ton floor jack not to big but much safer on unsteady ground and as we all know we dont always have good ground to work on that and a good peice of plywood will always save the day if you dont like the
Question about Chevrolet Silverado 1500
...floor jack to life the front end of my vehicle If im placing the two ton jack stands under the frame to support the front end where am i supposed to be placing the floor jack to lift it in the first ...
995 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions