2004 Chevrolet Silverado 1500 Crew Cab "car trouble starting ac running" Questions

...AC" The second is under the hood may be marked Heater, Blower, or Fan and should be 30 Amp. The one in the cab supplies switched 12 volts to the fan speed switch. The one under the hood supplies the ...

...car is not overheating and the ac blows cool are when I start moving. Hello: You may have a cooling fan(s) problem. Start the truck, turn the a/c on max, both fan and a/c control. Open hood the ...

...CAR DRIVES.????????? 4: HEAD LAMPS WORK KEY ON AND OFF. , 5: OTHER ELECTRIC FAILURES OR JUST THE BLOWER ONLY? 6: SCAN THE pcM FOR ERRORS, AC IS CUT DEAD EVEN FOR ENGINE OVERHEATING OR OVERLOADED !!! ...

...car ran with gas just flowing into carb without injectors, put injectors back in no start, checked for electricity in wires to injectors w trouble lite seems to have electricity. Any Idea what is ...

ac off. Fans run all time. Are the fans running on low or high ? Circuit/System Description The engine control module (ECM) commands the fans ON in either high speed or low speed, depending on cooling

...car will start to make a clunking sound accompanied by a whine, it will also have a burning rubber smell and even a little smoke from the front by the radiator, can anyone help me trouble shoot the ...

...the car starts check (ALL) hard codes set. the clutch and the A..C compressor may have shorted as well ,i advise disconnecting them before any attempt to trouble shoot any of the systemsgood ...

...ac don’t work Did you have the vehicle scanned for DTC'S - diagnostic trouble codes ? That's the place to start , not at auto zone ,pep boy's ,advance etc.... Qualified repair shop that has a ...

trouble starting and it has been getting progressively worse over the last 2 weeks. If it has been running for awhile it has no problem starting but if its sets for more than a few hours it really has

...ac radio windows what is year--make--model? If asd relay, I guess dodge or chrysler vehicle. Make sure battery has a full charge and battery connections all good. Pull asd relay, use jumper wire on ...